01-28
/2026
Repeat “high-temp alarms” usually aren’t just about capacity—they are caused by performance drift, installation heat traps, or sealing issues. This article shares practical checks and fixes to cut service visits and lower O&M cost for outdoor power cabinets
01-22
/2026
Many indoor cabinet “high-temp alarms” are not sudden failures—they build up slowly due to local heat pockets, airflow degradation, and load changes. This guide shows how to diagnose temperature creep early and prevent nuisance trips with simple monitoring signals.
01-09
/2026
Outdoor cabinets are used to protect communication, power, and industrial control equipment in outdoor environments, providing structural protection, environmental sealing, and security management. These cabinets typically need to be dustproof, waterproof, corrosion-resistant, UV-resistant, temperature-resistant, and weather-resistant.
12-29
/2025
A practical guide to selecting power cabinet air conditioners: heat load, ambient limits, IP56 design, mounting options, and maintenance for long-term uptime.
10-15
/2025
Outdoor cabinets are used to protect communication, power, and industrial control equipment in outdoor environments, providing structural protection, environmental sealing, and security management. These cabinets typically need to be dustproof, waterproof, corrosion-resistant, UV-resistant, temperature-resistant, and weather-resistant.
10-15
/2025
Outdoor cabinet reliability is defined not only by the enclosure itself, but also by the quality and compatibility of its components. Key parts—such as gaskets, locks, fan-filter systems, cable glands, drainage and anti-condensation designs, grounding and surge protection—directly affect ingress protection, thermal performance, and maintenance frequency.
10-15
/2025
Outdoor electrical equipment is susceptible to heat buildup inside the enclosure during summer months due to high temperatures and direct sunlight. This can lead to excessive temperature rise in components, performance degradation, and frequent activation of protective devices, affecting power supply stability and equipment lifespan.